Taper roller bearings are highly versatile and widely used components in various industrial applications due to their ability to support both radial and axial loads. Understanding the taper roller bearing size chart is crucial for selecting the right bearing for the specific requirements of your machinery.
Taper roller bearing size charts provide detailed information about the dimensions, capacity, and other specifications of taper roller bearings. The chart typically includes the following data:
Choosing the Right Taper Roller Bearing
Selecting the appropriate taper roller bearing is essential for optimal performance and longevity. The taper roller bearing size chart can guide your decision-making process by providing the necessary technical specifications. Consider the following factors when selecting a bearing:
Bore Diameter (mm) | Outside Diameter (mm) | Width (mm) | Static Load Rating (kN) | Dynamic Load Rating (kN) |
---|---|---|---|---|
20 | 47 | 17 | 11.7 | 16.1 |
30 | 55 | 22 | 18.8 | 25.8 |
40 | 72 | 28 | 28.2 | 38.6 |
50 | 90 | 33 | 40.0 | 55.0 |
60 | 110 | 38 | 54.4 | 75.2 |
Bore Diameter (mm) | Outside Diameter (mm) | Width (mm) | Static Load Rating (kN) | Dynamic Load Rating (kN) |
---|---|---|---|---|
70 | 130 | 43 | 71.1 | 98.0 |
80 | 150 | 48 | 90.0 | 124.0 |
90 | 170 | 53 | 111.3 | 154.0 |
100 | 190 | 58 | 135.1 | 187.0 |
110 | 210 | 63 | 161.5 | 224.0 |
Answer: A taper roller bearing size chart provides details on bore diameter, outside diameter, width, static load rating, and dynamic load rating.
Answer: Consider load requirements, shaft and housing dimensions, speed, and environmental conditions when selecting the appropriate taper roller bearing size.
Answer: Common taper roller bearing dimensions range from 20mm bore diameter and 47mm outside diameter to 110mm bore diameter and 210mm outside diameter.
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-08-23 11:53:57 UTC
2024-08-23 11:54:10 UTC
2024-08-23 11:54:30 UTC
2024-08-23 11:54:47 UTC
2024-08-27 00:33:30 UTC
2024-10-18 01:33:03 UTC
2024-10-18 01:33:03 UTC
2024-10-18 01:33:00 UTC
2024-10-18 01:33:00 UTC
2024-10-18 01:33:00 UTC
2024-10-18 01:33:00 UTC
2024-10-18 01:33:00 UTC
2024-10-18 01:32:54 UTC