Replace Dryer Bearing: A Quick Guide to Fix a Noisy Appliance
If your dryer is making a loud noise, it's likely that the bearings have gone bad. Replacing the bearings is a relatively simple repair that can be done in about an hour. Here's a step-by-step guide on how to replace bearing in dryer:
1. Safety First
Before you start, unplug the dryer and turn off the gas supply. Also, make sure to wear safety glasses and gloves.
2. Remove the Front Panel
To remove the front panel, first remove the screws holding it in place. Then, gently pull the panel forward until it comes off.
3. Locate the Bearings
The bearings are located on the sides of the dryer drum. They are held in place by a C-clip.
4. Remove the C-Clip
Use a pair of needle-nose pliers to remove the C-clip. Be careful not to lose the clip.
5. Remove the Bearings
Once the C-clip is removed, you can pull the bearings off the shaft.
6. Install the New Bearings
Slide the new bearings onto the shaft. Make sure that they are seated properly.
7. Install the C-Clip
Reinstall the C-clip to hold the bearings in place.
8. Reinstall the Front Panel
Reinstall the front panel and tighten the screws.
9. Test the Dryer
Plug in the dryer and turn on the gas supply. Start the dryer and listen for any noise. If the noise is gone, you have successfully replaced bearing in dryer.
Benefits of Replacing Dryer Bearings
Replacing the bearings in your dryer has several benefits, including:
| Benefit |
Description |
| Reduced noise |
Replacing the bearings can significantly reduce the noise level of your dryer. |
| Improved performance |
New bearings will help your dryer run more smoothly and efficiently. |
| Extended lifespan |
Replacing the bearings can extend the lifespan of your dryer by several years. |
How to Replace Dryer Bearings
Replacing the bearings in your dryer is a relatively simple repair that can be done in about an hour. Here are the steps involved:
-
Gather your tools and materials. You will need a pair of needle-nose pliers, a screwdriver, and a new set of bearings.
- Unplug the dryer and turn off the gas supply.
- Remove the front panel of the dryer.
-
Locate the bearings. The bearings are located on the sides of the dryer drum.
-
Remove the C-clip. Use a pair of needle-nose pliers to remove the C-clip that holds the bearings in place.
-
Remove the bearings. Once the C-clip is removed, you can pull the bearings off the shaft.
-
Install the new bearings. Slide the new bearings onto the shaft. Make sure that they are seated properly.
-
Install the C-clip. Reinstall the C-clip to hold the bearings in place.
- Reinstall the front panel of the dryer.
FAQs About Replacing Dryer Bearings
Here are some frequently asked questions about replace bearing in dryer:
Q: How often should I replace the bearings in my dryer?
A: The bearings in your dryer should be replaced every 5-7 years, or more often if you use your dryer frequently.
Q: Can I replace the bearings in my dryer myself?
A: Yes, replacing the bearings in your dryer is a relatively simple repair that can be done in about an hour.
Q: How much does it cost to replace the bearings in my dryer?
A: The cost of replacing the bearings in your dryer will vary depending on the make and model of your dryer, as well as the cost of the bearings. However, the average cost is between $50 and $100.
Q: What are the symptoms of bad dryer bearings?
A: Some of the symptoms of bad dryer bearings include:
- A loud noise coming from the dryer
- The dryer drum wobbling or shaking
- The dryer taking longer to dry clothes
- The dryer overheating
