The 6007 bearing is a single-row, deep-groove ball bearing that is widely used in various industrial and automotive applications. It is known for its high load capacity, long service life, and versatility.
The 6007 bearing consists of an inner ring, an outer ring, a set of balls, and a cage. The balls are evenly spaced between the inner and outer rings and are separated by the cage. This arrangement ensures smooth and efficient rotation while supporting radial loads.
The 6007 bearing finds application in a wide range of industries, including:
The load capacity of the 6007 bearing is determined by its size, material, and lubrication. It is important to select a bearing with a load capacity that exceeds the expected operating load to ensure reliable performance and longevity.
The service life of the bearing depends on various factors, including the load, speed, lubrication, and environmental conditions. Proper maintenance and lubrication can significantly extend the bearing's service life.
The 6007 bearing plays a critical role in the operation of various machines and equipment. Its high load capacity and long service life ensure reliable performance, even in demanding conditions. The versatility of the bearing makes it suitable for a wide range of applications.
If you are looking for a high-quality, reliable, and versatile bearing for your application, consider the 6007 bearing. Its exceptional performance and proven track record make it an ideal choice for engineers and designers.
Once upon a time, there was a bearing named Ollie who was tasked with supporting a heavy load. Unfortunately, Ollie was too small for the job and had to work extra hard to handle the excessive weight. As a result, Ollie overheated, wore out quickly, and caused the machine it was supporting to fail.
Lesson Learned: Never overload a bearing, as it can lead to premature failure and costly consequences.
There was another bearing named Barney who lived in a neglected machine. Barney was not regularly lubricated or inspected, and as a result, he became rusty and worn. One day, Barney seized up and caused the machine to break down during an important operation.
Lesson Learned: Proper maintenance and regular lubrication are essential to extend bearing life and prevent unexpected breakdowns.
In a faraway land, there was a bearing named Max who was accidentally misaligned during installation. As a result, Max experienced high stress and vibration, which caused it to overheat and fail.
Lesson Learned: Always ensure that bearings are properly aligned to prevent excessive wear and premature failure.
Dimension | Value |
---|---|
Bore Diameter (d) | 35 mm |
Outside Diameter (D) | 72 mm |
Width (B) | 17 mm |
Weight | 0.28 kg |
Dynamic Load Capacity | 12.6 kN |
Static Load Capacity | 8.3 kN |
Lubricant Type | Application |
---|---|
High-temperature grease | High-speed and high-temperature applications |
Low-temperature grease | Low-temperature applications |
Oil | Applications where high speed and low friction are required |
Bearing-specific lubricants | Applications with extreme temperature or load conditions |
Failure Mode | Cause |
---|---|
Wear | Abrasive wear, adhesive wear, fretting wear |
Fatigue | Rolling contact fatigue, raceway fatigue |
Seizure | Overload, lubrication failure |
Corrosion | Water, acids, chemicals |
Contamination | Dust, debris, foreign particles |
Misalignment | Incorrect installation, thermal expansion |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-08-01 22:39:18 UTC
2024-08-01 22:39:32 UTC
2024-08-02 21:45:53 UTC
2024-08-02 21:46:07 UTC
2024-08-03 22:54:33 UTC
2024-08-03 22:54:43 UTC
2024-08-05 02:36:10 UTC
2024-08-05 02:36:21 UTC
2024-10-19 01:33:05 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:01 UTC
2024-10-19 01:33:00 UTC
2024-10-19 01:32:58 UTC
2024-10-19 01:32:58 UTC