The 6006 bearing is a single-row, deep-groove ball bearing with an open design. It is the most widely used bearing type in the world, accounting for over 80% of all bearings produced. 6006 bearings are available in a variety of sizes, with bore diameters ranging from 30 mm to 110 mm.
6006 bearings are typically made from chrome steel, which is hardened and tempered to provide a high level of wear resistance. The bearing consists of an inner ring, an outer ring, and a set of balls that are held in place by a cage. The cage can be made from steel, brass, or plastic.
6006 bearings are used in a wide variety of applications, including:
6006 bearings offer several benefits over other types of bearings, including:
Pros:
Cons:
To ensure that 6006 bearings last for as long as possible, it is important to follow a few simple maintenance tips:
Proper maintenance of 6006 bearings is essential for several reasons:
6006 bearings have a bore diameter of 30 mm, while 6007 bearings have a bore diameter of 35 mm.
The maximum speed for a 6006 bearing depends on the specific application and the type of lubricant used. However, most 6006 bearings can operate at speeds up to 10,000 rpm.
The cost of a 6006 bearing will vary depending on the size, configuration, and brand. However, you can typically expect to pay between $10 and $50 for a single bearing.
6006 bearings are available from a variety of sources, including online retailers, bearing distributors, and hardware stores.
Installing a 6006 bearing is a relatively simple process. However, it is important to follow the manufacturer's instructions carefully to avoid damaging the bearing.
Removing a 6006 bearing is a bit more difficult than installing one. However, it can be done with a few simple tools.
If you are looking for a high-quality, reliable bearing for your application, then a 6006 bearing is a great choice. 6006 bearings are available from a variety of sources, so you can be sure to find one that meets your needs and budget.
Bearing Size | Bore Diameter | Outer Diameter | Width |
---|---|---|---|
6006 | 30 mm | 62 mm | 16 mm |
Bearing Material | Load Capacity | Speed Rating |
---|---|---|
Chrome steel | 10,000 N | 10,000 rpm |
Maintenance Tips | Benefits |
---|---|
Lubricate regularly | Extends bearing life |
Inspect periodically | Reduces risk of equipment failure |
Replace when necessary | Improves safety |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-08-01 20:00:47 UTC
2024-08-01 20:01:01 UTC
2024-08-02 18:19:29 UTC
2024-08-02 18:19:39 UTC
2024-08-03 19:26:32 UTC
2024-08-03 19:26:48 UTC
2024-08-04 22:40:43 UTC
2024-08-04 22:40:56 UTC
2024-10-19 01:33:05 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:01 UTC
2024-10-19 01:33:00 UTC
2024-10-19 01:32:58 UTC
2024-10-19 01:32:58 UTC