Introduction
Honda's rod bearing recall, first announced in 2019, has been a major concern for owners of affected vehicles. Rod bearings are critical components in an engine, and their failure can lead to catastrophic engine damage. This article will provide a comprehensive overview of the recall, including affected models, symptoms, and remedies. It will also provide helpful tips and tricks for affected owners.
Affected Models
The following Honda models are affected by the rod bearing recall:
Symptoms
The following symptoms may indicate a rod bearing failure:
Remedy
If you are experiencing any of the symptoms listed above, it is important to contact your local Honda dealer immediately. Honda will inspect your vehicle and, if necessary, replace the rod bearings. The repair is free of charge to owners.
Tips and Tricks
Here are some helpful tips and tricks for affected owners:
Common Mistakes to Avoid
Here are some common mistakes to avoid when dealing with the Honda rod bearing recall:
Why the Honda Rod Bearing Recall Matters
The Honda rod bearing recall is a serious issue that can lead to catastrophic engine damage. It is important for affected owners to be aware of the symptoms and to take action to prevent engine failure. By following the tips and tricks outlined in this article, affected owners can help protect their vehicles from damage.
Benefits of Getting Your Vehicle Repaired
There are many benefits to getting your vehicle repaired under the Honda rod bearing recall. These include:
Conclusion
Honda's rod bearing recall is a major issue that can affect thousands of vehicles. It is important for affected owners to be aware of the symptoms and to take action to prevent engine failure. By following the tips and tricks outlined in this article, affected owners can help protect their vehicles from damage and maintain their vehicle's value.
Q: How long does the repair take?
A: The repair typically takes 2-3 days to complete.
Q: Is the repair covered by warranty?
A: Yes, the repair is covered by Honda's 10-year/120,000-mile powertrain warranty.
Q: What happens if I don't get my vehicle repaired?
A: If you do not get your vehicle repaired, you are at risk of experiencing a rod bearing failure, which can cause catastrophic engine damage.
Model | Production Years | Number of Affected Vehicles |
---|---|---|
Honda Civic 1.5T | 2016-2019 | 214,000 |
Honda CR-V 1.5T | 2016-2019 | 145,000 |
Honda Accord 1.5T | 2016-2019 | 110,000 |
Honda HR-V 1.5T | 2017-2019 | 55,000 |
Symptom | Description |
---|---|
Knocking or ticking sounds from the engine | This is the most common symptom of a rod bearing failure. The sound will typically be loudest when the engine is cold and will get quieter as the engine warms up. |
Reduced engine power | A rod bearing failure can cause the engine to lose power. This is because the rod bearings are responsible for connecting the pistons to the crankshaft. When the rod bearings fail, the pistons cannot move properly, which reduces engine power. |
Increased oil consumption | A rod bearing failure can cause the engine to burn more oil. This is because the rod bearings help to seal the oil passages in the engine. When the rod bearings fail, oil can leak out of the engine, which causes the oil level to drop. |
Engine overheating | A rod bearing failure can cause the engine to overheat. This is because the rod bearings help to dissipate heat from the engine. When the rod bearings fail, heat can build up in the engine, which can cause it to overheat. |
Check engine light illumination | A rod bearing failure can cause the check engine light to illuminate. This is because the rod bearings are monitored by the engine's computer. When the rod bearings fail, the computer will detect the problem and illuminate the check engine light. |
Tip | Description |
---|---|
Keep your oil level checked | Low oil levels can lead to premature rod bearing failure. Check your oil level regularly and add oil as needed. |
Use the correct oil | Honda recommends using 0W-20 full synthetic oil in affected vehicles. Do not use other types of oil, as they may not provide adequate protection. |
Avoid high-revving the engine | High-revving the engine puts additional stress on the rod bearings, which can lead to failure. Avoid revving the engine above 4,000 RPM. |
Get your vehicle inspected regularly | Honda recommends having your vehicle inspected by a qualified technician every 6,000 miles. This will help ensure that any potential problems are detected early and corrected. |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-08-01 15:46:40 UTC
2024-08-01 15:46:51 UTC
2024-08-02 12:39:27 UTC
2024-08-02 12:39:37 UTC
2024-08-03 13:47:50 UTC
2024-08-03 13:48:03 UTC
2024-08-04 16:17:06 UTC
2024-08-04 16:17:19 UTC
2024-10-19 01:33:05 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:01 UTC
2024-10-19 01:33:00 UTC
2024-10-19 01:32:58 UTC
2024-10-19 01:32:58 UTC